In every house you can be sure that there is some dedicated spot for a nice pallet project... What do you think???
In the below pallet project, I am sharing with you what could be created out of two EURO pallets..
First of all! Join us here at MyATCtv DIY to see more...
And As you may know, sharing this article help us to find ideas and create even more for you to see. If we will be very pleased if you can show us some love by sharing !
Below here is a preview of the 3D plan and DIY video made available for you!
Before starting please find here a list of tools you might need in order to do it yourself:
Tool used:
And more below...
We put together a list of some of the tools used in the shop on our Amazon Store (affiliate link), if you'd like to support what we do, shop through this link: MyATCtv Amazon Store
And then!!! Of Course... You will need 2 pallet from the EURO type, if possible as much as clean as possible...
To make sure they have the same dimensions, I am here turning them both in an horizontal position...
Then to start making the cut (here using my jigsaw) I put them alt to the ground in order to make it easier for me to work on.
Here is the visual you should have when the first one has been cut
And when both are cut...
As you can imagine, the more dirty they are the more sanding you'll have. So here I am using my belt sander connected to my vaccum cleaner to sand as much as possible...
Also remember to keep the cut slat in order to create the different shelves. And as I didn't want to clean them with the sander I have decided to use instead my planer
I have been wondering which color will be the best for this design and at the end went for a simple white wall paint...
When both were completly painted (and believe me it can take some times)... I am here adding on top a large plexiglas to act as the top table...
To cut the plexiglas I will use my plunge saw and make sure bring it to 30 cm large and 1 meter long. Note the i will use the left over to create the side...
Now time to attached the shelves and for this I will be using some angle brackets to keep them well in place
As this design was made for a friend of mine I am assembling the all at their place using 3 cm long screws...
Then fixing the the wall using angle bracket at the bottom and long 10 cm long screws to keep the all flat to the wall
When the all has been placed, I have to say that this design is one of my best pallet ones so far...
I hope you like the result and if it's the case leave a comment for me below!
Mr ATC for another idea of housing
Would you like to support ATC for more sustainable consumption patterns? Take part of the 1 reservation = 1 tree planted program, book here and share:
Did you like this article? Register now and for free to be informed of new and up-to-date news articles.
Thanks Hamza, my pleasure to share with you guys. I have some more coming soon..